Showing 50 of 25456 papers

HEAVY ISOTOPE OF HYDROGEN \*

L. Farkas
1935 SovietRxiv: ru-193501.37451

This review reports on the advances achieved in these fields of the natural sciences in connection with the discovery of the heavy isotope of hydrogen. We shall see that not only is the study of the properties of the heavy hydrogen isotope of interest, but that its applications as an auxiliary tool …

On the Nucleation of Crystals

N. Fuks
1935 SovietRxiv: ru-193501.36204

In this article, we will focus on the formation of nuclei, limiting ourselves to one of the most interesting and, in practical terms, the most important—and therefore most extensively studied—cases: the formation of crystalline nuclei in liquids.

Determination of the activity of unsaturated organic compounds by the electromotive force of the reaction with sodium

S. TRONOV and L. P. KULEV
1935 SovietRxiv: ru-193501.07672

This study examines whether the electromotive force generated during reaction with sodium can be used to assess the activity of unsaturated organic compounds containing double or triple bonds. A broad series of hydrocarbons, aldehydes, ketones, esters, nitriles, nitro compounds, and pyridine type ba…

Magnesioferrite deposit in the Lower Tunguska region

F. N. SHAKHOV and V. S. POPOV
1935 SovietRxiv: ru-193501.07671

This paper examines iron-ore deposits in the Lower Tunguska region, comparing them with related Angara-Ilim contact deposits associated with trap intrusions. Using field observations, chemical analyses, specific-gravity measurements, and reflected-light microscopy, the authors identify the principal…

On the Composition and Genesis of the Ores of the Kailan, Ditur, and Kimkan Iron Ore Deposits of the Far Eastern Region

A. I. ALEKSANDROV
1935 SovietRxiv: ru-193501.07670

This paper presents a microscopic study of iron ores and associated rocks from the Kailan, Ditur, and Kimkan deposits in the Far Eastern Territory, focusing on mineral composition, textures, paragenesis, and ore genesis. The study identifies a transition from predominantly hematite ores at Kailan th…

Rate of Oxidation of Monocarboxylic Acids of the Saturated Series by Potassium Permanganate under Various Conditions

V. V. TRONOV, M. T. YALOVAYA, and K. Ya. BUDANOVA
1935 SovietRxiv: ru-193501.07669

The study examines how molecular size, branching, and reaction medium affect the oxidation of saturated monocarboxylic acids by potassium permanganate. Reaction rates were measured titrimetrically for acids from formic through decanoic acid, including several branched isomers, in neutral salt soluti…

Theodolite for Surveying in Mines and on the Surface

A. A. GRUSHOV
1935 SovietRxiv: ru-193501.07666

This paper describes a redesign of a small Geofizika theodolite intended to serve both surface surveying and mine surveying, where steep or vertical workings make a central telescope impractical. The proposed instrument allows the same telescope to be mounted either centrally or eccentrically by add…

Iron Current Limiters

I. D. Kutyavin
1935 SovietRxiv: ru-193501.07664

This article develops a calculation theory for iron resistors used as current limiters in power-station circuits, especially for limiting high short-circuit currents in low-power branches connected to powerful busbars. It derives thermal design equations for resistor mass, strip dimensions, permissi…

Graphical method for determining natural frequencies of oscillations

Unknown
1935 SovietRxiv: ru-193501.07663

This article addresses the practical problem of determining natural torsional vibration frequencies in shaft systems of piston engine power plants, especially systems with multiple equal engine masses and one or two large flywheels. It develops a graphical method based on reducing the inertial effec…

Hay mower workflow

Unknown
1935 SovietRxiv: ru-193501.07662

This article develops a theoretical account of the working process of a hay mower, focusing on the forces and work associated with the cutting mechanism. It decomposes the mower’s tractive effort into cutting, rolling, and finger bar resistance, then models knife motion, the line of shearing, and th…

On the Operation of a Constant-Power Drilling Machine

A. M. ROZENBERG
1935 SovietRxiv: ru-193501.07661

This article addresses the practical selection of cutting conditions for constant-power drilling machines, with the aim of maximizing productivity without overloading the machine, feed mechanism, spindle drive, or drill. It develops analytical relations linking drill diameter, feed, cutting speed, t…

Calibration of I-Beam No. 25

Unknown
1935 SovietRxiv: ru-193501.07659

This paper examines the calibration of No. 25 I-beams, focusing on how unequal deformation in different parts of a roll pass can overstress the metal and increase defective output. Through three worked calibration examples, it compares the Kirchberg method, the Tafel principle, and a proposed method…

Deformation of a strut beyond the stability limit

G. V. TRAPEZNIKOV
1935 SovietRxiv: ru-193501.07658

This paper analyzes the post-buckling deformation of a hinged column under axial compression, with attention to the end shortening that occurs after the load exceeds the Euler critical force. Starting from the exact elastica equation, it expresses deflection, end settlement, load, and bending moment…

Conference on Theoretical Physics

M. P. Bronstein
1934 SovietRxiv: ru-193401.99628

In this note we shall give a very brief overview of the content of the conference papers. The brevity of the overview is necessary because the Kharkov conference (unlike, for example, the Leningrad nuclear conference in September 1933, at which predominantly review-type reports were presented) was d…

On Short and Very Short Electric Waves*

A. Sheibe
1934 SovietRxiv: ru-193401.97525

Report at the colloquium of the German State Physical-Technical Institute, published in the journal “Physikalische Zeitschrift” 35, 206, 1934; translated by N. N. Malov. This review outlines, in general terms and as briefly as possible, the most important information on the generation, propagation, …