Proceedings of the Tomsk Polytechnic Institute Named after S. M. Kirov, Holder of the Order of the October Revolution and the Order of the Red Banner of Labor

Volume 195
1974

TPI Electron Accelerators

I. P. Chuchalin

The Tomsk Polytechnic Institute has made a significant contribution to the development of electron accelerators. The creation of the first Soviet betatron at TPI dates to the first postwar years (1946–1947). On the initiative and under the leadership of Professor A. A. Vorob'ev, a small group of physicists and engineers, effectively isolated from the outside world because of the conditions of that time, ventured to develop and create a complex electrophysical device. The pioneers of the first Tomsk and Soviet betatrons, together with Professor A. A. Vorob'ev, were TPI associate professors A. K. Potuzhnyi, V. N. Titov, and M. F. Filippov.

The Tomsk Polytechnic Institute has developed, manufactured, and installed, in various scientific institutions, higher educational institutions, industrial enterprises, clinics of our country and abroad, more than 60 betatrons bearing the TPI designation. The theoretical and experimental studies carried out by TPI staff cover a broad range of questions in the field of creating magnetic fields for betatrons [1–5], the process of capturing electrons into acceleration [6–11], extracting electrons from the accelerating chamber [12–14], studying the spectral and angular characteristics of bremsstrahlung radiation and electron beams [15–16], developing electrical circuits for power supply, control, and stabilization of radiation [17–20], etc.

Table 1 gives the main types of betatrons developed at TPI, indicating their characteristics.

The betatrons manufactured at TPI are widely used in the fields of nuclear and radiation physics, radiation chemistry, in medicine and biology, and in industry, especially for flaw detection of products [21–26].

Several examples of the application of TPI betatrons are given below.

For the Barnaul Boiler Plant, the BD-2 integrated betatron flaw detector at 25 MeV was developed and introduced into production for the first time in world practice, for inspection of thick-walled welded joints. The flaw detector makes it possible to conduct continuous automatic inspection of welds up to 350 mm thick and up to 100 mm wide, with a productivity of up to 30 km of seams in one month.

For the Angarsk Oil Refinery, an integrated betatron flaw detector BD-1 was developed, which makes it possible to carry out

carry out automatic inspection of steel forgings up to 500 mm thick with a productivity of 2 m²/hour.

The use of complex betatron flaw detectors for quality control of materials and products makes it possible to reduce the inspection time by tens of times in comparison with radiographic methods of radiation flaw detection, while maintaining high sensitivity to detectable defects.

Table 1

Characteristics of the main types of betatrons developed at TPI

The betatrons manufactured by the institute have repeatedly been exhibited at the Exhibition of Achievements of the National Economy. For the 25 MeV and 30 MeV betatrons the institute was awarded first-degree honorary diplomas, and the leading research associates were awarded medals of the VDNKh.

At the Research Institute of Nuclear Physics, Electronics, and Automation of the Tomsk Polytechnic Institute (NII YaF TPI), several types of high-current betatrons and two-chamber stereobetatrons have been developed and put into operation [27—31]. Owing to the use of a high-voltage injection system and to an increase in the zone of focusing forces in the high-current betatrons, more than \(10^{12}\) electrons are accelerated per pulse, which is more than 100 times greater than the accelerated currents obtained in the best betatron models of the well-known foreign firms Brown—Boveri and Siemens.

Figure 1 shows a photograph of the high-current betatron SB-25 with an accelerated-electron energy of 25 MeV. Certain stereobetatron designs were exhibited at Soviet exhibitions in the USA and Czechoslovakia. At VDNKh they were awarded diplomas, and their creators—medals.

The use of high-current betatrons for flaw detection in thick-walled metallic and nonmetallic products makes it possible to sharply reduce exposure time and improve the detectability of defects. The presence in stereobetatrons of two intersecting beams of bremsstrahlung proves very useful both for the purposes of flaw detection and for deep therapy in the treatment of malignant tumors.

Fig. 1

In Tomsk, for the first time in the Soviet Union, a betatron was used for the treatment of malignant tumors, with a preceding experimental study of the biological action of high-energy bremsstrahlung.

Tomsk physicians, under the general direction of Professor I. V. Toroptsev, provided a systematics of morphological changes in the organs and tissues of experimental animals subjected to the action of betatron bremsstrahlung at various energies, with a wide range of doses under conditions of single and repeated irradiations.

The broad development of construction in our country and the associated urgent need to carry out quality control of performed work require the creation and development of new portable flaw detectors. At construction and assembly sites, on routes, and under field and shop conditions, radioactive radiation sources are currently used most often for flaw detection. However, these emitters have a low utilization coefficient, require special storage facilities, and, at medium and high activities, have containers of considerable dimensions and weight and pose a serious constant radiation hazard to operators and those nearby.

In view of the noted shortcomings of isotope radiation sources, at the Tomsk Polytechnic Institute for several years work has been under way on the development of special betatron designs intended for carrying out inspection under the above-mentioned nonstationary conditions. As a result of this work, portable betatrons with radiation energies of 3–6 MeV have been created; they are capable of successfully competing with most isotope installations, providing higher defect detectability and making it possible to inspect products of greater thickness.

The developed portable small-sized betatrons [32–34] are made in the form of three or four separate units connected during operation by cables. The weight and dimensions of the units make it possible to carry them by hand to hard-to-reach objects of inspection.

Production tests of prototypes of portable betatrons have shown their high efficiency and have brought about broad interest in these installations on the part of industrial enterprises.

Figure 2 shows a photograph of the small-sized PMB-6s betatron, which makes it possible to inspect steel products up to 250 mm thick and concrete products up to 600 mm thick. The exposure time for steel

Fig. 2

250 mm thick is 45 minutes, with a sensitivity of about 1%.

The PMB-6s betatron developed at the institute, together with industrial enterprises of Tomsk, has been prepared for serial production. Designs of this betatron were exhibited at international fairs in Vienna (1968) and Leipzig (1969), where they were sold from the stands. One of the betatrons was supplied to France by order of a firm. In July 1969 the PMB-6s betatron was demonstrated at the International Exhibition of Welding Equipment in Japan.

At the Scientific Research Institute of Nuclear Physics of TPI, two types of microtrons have been developed [35–38], the characteristics of which are given in Table 2.

Microtrons were developed as injectors for a 1.5 GeV synchrotron. The synchrotron operates at a frequency of 1–2 Hz, and therefore the pulse repetition frequency of the microtrons is also 1–2 Hz. The pulse repetition frequency of the microtrons can be increased to 50 or 400 Hz,

which makes it possible to obtain average values of the currents of accelerated electrons of up to 7.5 or 600 μA, respectively.

Table 2

Main characteristics of microtrons developed at the Nuclear Physics Research Institute, Tomsk Polytechnic Institute

Figure 3 shows a photograph of the 7.0-MeV microtron.
At the Nuclear Physics Research Institute of TPI, direct-action accelerators are being developed. At first, direct-action accelerators were developed as electron injectors for cyclic accelerators—betatrons and synchrotrons.

Fig. 3

Subsequently, the need arose to create direct-action accelerators with energies of 200–700 keV as independent installations for use in various fields of science and technology, such as quantum electronics, radiation chemistry, medicine, etc.

Table 3 gives the main characteristics of the high-current high-voltage accelerator SVU-1. Structurally, the accelerator is arranged in two movable units—the emitter unit and the control console.

The emitter unit contains a pulse transformer, an electron gun, and a vacuum system with its power-supply circuit. The dimensions of the emitter unit are \(880 \times 850 \times 1070\ \text{mm}^3\), and its weight is 200 kg. The control console contains a modulator with a rectifier and all monitoring and control instruments. The dimensions of the control console are \(900 \times 1200 \times 1300\ \text{mm}^3\), and its weight is 200 kg.

The vacuum in the electron gun and accelerating tube of the SVU-1 accelerator, as well as in the vacuum chambers of the TPI betatrons, is produced by compact titanium ion-sorption pumps developed at the institute.

The SVU-1 accelerator was exhibited in 1966 at the Exhibition of Achievements of the National Economy, where it was awarded a silver medal. In 1967 it was exhibited at the Soviet exhibition in Budapest.

For research in the field of quantum electronics, a nanosecond electron accelerator was developed with the following parameters: energy of accelerated electrons up to 500 keV, electron current in the pulse up to 1500 A, current-pulse duration 30–40 nsec.

Table 3

Main parameters of the SVU-1.

At the Tomsk Polytechnic Institute, A. A. Vorob’ev proposed [39–40], and under the direction of A. A. Vorob’ev and A. N. Didenko developed [41–42], waveguide synchrotrons combining the advantages of linear waveguide and cyclic accelerators. Being waveguide accelerators, they provide large energy gains per unit length. Being cyclic, they make it possible to accelerate particles to high energies with a comparatively short waveguide length.

Structurally, the high-frequency system of waveguide synchrotrons is some kind of slowing, curved system closed into a ring, placed in the interpole space of an ordinary synchrotron. The slowing system is needed in order to reduce the phase velocity of one of the waves to the particle velocity (in the case of electrons, to the speed of light) and thereby create conditions for continuous acceleration of the particles.

To confirm the principal theoretical propositions, two waveguide cyclic electron accelerators of 10 MeV were built and put into operation at the Research Institute of Nuclear Physics of TPI in 1963 and 1964: one with an accelerating system in the form of a curved waveguide of rectangular cross section, diaphragmed along the outer curved wall, and the other with an accelerating system in the form of a smooth curved closed waveguide. In both accelerators, the electrons are first accelerated to an energy of 3 MeV in the betatron mode.

Waveguide accelerating systems are one possible variant in the development of electron and proton accelerators to ultrahigh energies. The efficiency of such systems increases greatly if the aperture of the accelerating chamber is reduced, as is the case in cybernetic accelerators being developed under the direction of Academician A. L. Mints.

At the Research Institute of Nuclear Physics of TPI, one of the most powerful cyclic electron accelerators has been developed, constructed, and put into operation.

in our country—the “Sirius” electron synchrotron with an energy of 1.5 GeV [43–50].

A large volume of scientific research has been carried out on the synchrotron, and interesting results have been obtained on the influence of quantum fluctuations of electron radiation on their motion in the accelerator chamber. Valuable results have been obtained in the physics of elementary particles.

At the Tomsk Polytechnic Institute, theoretical and experimental studies are being conducted on new methods of accelerating charged particles and on the development of new types of accelerators [51–57].

REFERENCES

1. B. N. Rodimov. Izv. Tomsk. Politekhn. In-ta, 87, 3, 1957.
2. P. A. Cherdantsev. Izv. Tomsk. Politekhn. In-ta, 87, 41, 1957.
3. M. F. Filippov. Izv. Tomsk. Politekhn. In-ta, 87, 77, 1957.
4. M. F. Filippov. Izv. Tomsk. Politekhn. In-ta, 87, 87, 1957.
5. I. G. Leshchenko. Izv. Tomsk. Politekhn. In-ta, 87, 130, 1957.
6. B. N. Rodimov. Izv. Tomsk. Politekhn. In-ta, 87, 11, 1957.
7. I. P. Chuchalin. Izv. Tomsk. Politekhn. In-ta, 87, 256, 1957.
8. P. A. Cherdantsev. Izv. vuzov SSSR, “Fizika,” No. 6, 177, 1959.
9. P. A. Cherdantsev. Proceedings of the III Interuniversity Conference on Electron Accelerators. Tomsk, TSU Publishing House, p. 58, 1961.
10. P. A. Cherdantsev. Proceedings of the IV Interuniversity Conference on Electron Accelerators. Moscow, “Vysshaya Shkola,” p. 419, 1964.
11. O. V. Sokolov. Proceedings of the III Interuniversity Conference on Electron Accelerators. Tomsk, TSU Publishing House, p. 69, 1961.
12. L. S. Sokolov. Izv. Tomsk. Politekhn. In-ta, 87, 307, 1957.
13. B. A. Kononov. Izv. Tomsk. Politekhn. In-ta, 87, 322, 1957.
14. A. A. Vorobiev, L. S. Sokolov. Nucl. Instr., 4, 173, 1959.
15. E. M. Vasil’ev, B. A. Kononov. Proceedings of the III Interuniversity Conference on Accelerators, Tomsk, TSU Publishing House, p. 167, 1961.
16. S. S. Kulyukin. Proceedings of the IV Interuniversity Conference on Electron Accelerators. Moscow, “Vysshaya Shkola,” p. 452, 1964.
17. I. P. Chuchalin, V. M. Razin. Elektrichestvo, No. 9, 39, 1957.
18. V. M. Razin. Izv. Tomsk. Politekhn. In-ta, 87, 164, 1957.
19. V. M. Razin. Izv. Tomsk. Politekhn. In-ta, 87, 206, 1957.
20. E. M. Belov et al. Izv. Tomsk. Politekhn. In-ta, 138, 5, 1965.
21. L. M. Anan’ev, A. A. Vorob’ev, V. I. Gorbunov. Induction Accelerator of Electrons—Betatrons. Moscow, Atomizdat, 1961.
22. L. M. Anan’ev, A. A. Vorob’ev, V. I. Gorbunov. The Betatron and Its Application. Tomsk, 1962.
23. A. A. Vorob’ev et al. Betatron Defectoscopy of Materials and Products. Moscow, Atomizdat, 1965.
24. V. I. Gorbunov, A. V. Pokrovskii. Defektoskopiya, No. 5, 1965.
25. A. A. Vorob’ev, V. I. Gorbunov. New Betatrons and Their Use for Industrial Defectoscopy, TsIITEI, issue 22, 1961.
26. A. A. Vorob’ev et al. The Use of Betatrons in Defectoscopy. ONTIpribor, Moscow, 1964.
27. V. A. Moskalev. ZhTF, 26, 2060, 1956.
28. V. A. Moskalev et al. Izv. vuzov SSSR, “Fizika,” No. 5, 35, 1959.
29. A. A. Vorobiev, V. A. Moskalev. Zeitschrift, 4, 501, 1964.
30. V. A. Moskalev et al. Electron Accelerators. Proceedings of the V Interuniversity Conference. Moscow, Atomizdat, p. 112, 1966.
31. A. A. Vorob’ev et al. Izv. vuzov SSSR, “Fizika,” No. 3, 68, 1967.
32. L. M. Anan’ev et al. Small-Size Betatrons, GOSINTI, 10, issue 14, 1963.
33. L. A. Anan’ev et al. Proceedings of the IV Interuniversity Conference on Electron Accelerators. Moscow, “Vysshaya Shkola,” 480, 1964.
34. L. M. Anan’ev, V. A. Chakh lov, M. M. Shtein, Yu. P. Yarushkin. Defektoskopiya, No. 5, 60, 1968.
35. B. Z. Kanter. Izv. vuzov SSSR, “Fizika,” No. 3, 138, 1960.
36. B. Z. Kanter et al. Izv. Tomsk. Politekhn. In-ta, 122, 45, 1962.
37. B. Z. Kanter, Yu. G. Yushkov. PTE, No. 4, 28, 1964.
38. V. A. Vizir’ et al. Proceedings of the VI Conference on Electron Accelerators. Izd-vo “Energiya,” 176, 1968.
39. A. A. Vorob’ev, G. V. Krivoshekov. Izv. Tomsk. Politekhn. In-ta, 87, 358, 1957.

1. A. A. Vorob'ev. Izv. vuzov SSSR. “Elektromekhanika”, 1, No. 5, 106, 1958.

2. A. A. Vorob'ev et al. Proceedings of the International Conference on Accelerators, CERN, Geneva, 681, 1959.

3. A. A. Vorob'ev et al. Waveguide Synchrotrons. Atomizdat, Moscow, 1966.

4. A. A. Vorob'ev, I. P. Chuchalin. Vestnik vysshei shkoly, No. 11, 57, 1966.

5. A. A. Vorob'ev et al. Atomic Energy, 21, 435, 1966.

6. A. A. Vorob'ev et al. Izv. vuzov SSSR. “Physics”, No. 2, 162, 1967.

7. I. P. Chuchalin. Priroda, No. 2, 50, 1968.

8. A. A. Vorob'ev, I. P. Chuchalin, A. G. Vlasov et al. The TPI Synchrotron at 1.5 GeV, Atomizdat, 1968.

9. A. A. Vorob'ev et al. Proceedings of the VI Inter-University Conference on Electron Accelerators, Moscow, “Energiya,” 110, 1968.

10. A. A. Vorob'ev, M. N. Volkov et al. Nucl. Instrum. and Methods, 66, 321, 1968.

11. V. A. Vizir' et al. ZhTF, 39, issue 6, 982, 1969.

12. B. N. Rodimov, T. A. Medvedeva. Izv. vuzov SSSR. “Physics”, No. 4, 147, 1958.

13. B. N. Rodimov. Atomic Energy, 6, No. 2, 200, 1959.

14. B. N. Rodimov. Atomic Energy, No. 12, 240, 1962.

15. G. A. Kunitsyn, V. I. Gorbunov, Yu. A. Otrubyannikov. Proceedings of the IV Inter-University Conference on Electron Accelerators. Moscow, “Vysshaya shkola,” 185, 1964.

16. V. A. Moskalev. ZhTF, 35, issue 4, 1965.

17. A. A. Vorob'ev et al. Atomic Energy, 22, issue 1, 3, 1967.

18. R. G. Ziyakaev, G. P. Fomenko, I. P. Chuchalin, Yu. G. Yushkov. JETP Letters, 15, issue 6, 31, 1972.